Skip to content
Beauty devices, considered choices. Retail · Wholesale · Customization

Beauty Guides

Dr. Pen A6S Manual & Setup Guide (PDF Download) — Practical Guide

A practical guide to dr. Pen A6S Manual & Setup Guide (PDF Download). Compare the key concepts, product formats and points to check before choosing.

Dr. Pen A6S Manual & Setup Guide (PDF Download) — Practical Guide

The Dr. Pen A6S manual PDF helps you prepare your skin and device, follow aftercare steps, and plan session spacing. recommends waiting 4 to 6 weeks between microneedling treatments.

Device settings matter, but preparation and aftercare shape your routine, too. This guide explains how to ready the treatment area, handle the A6S cartridge, and care for your skin afterward.

You’ll also learn how microneedling differs from nanoneedling when planning sessions. Use these steps to organize your setup, whether you’re an esthetician or an experienced at-home user.

Prepare the treatment area by cleansing away makeup and lotions before you begin, and follow the device’s skin-preparation steps.

Give your skin a simple post-session routine: avoid exercise, sweating, and makeup for 24 hours, and protect it from direct, prolonged sunlight.

Plan microneedling sessions 4 to 6 weeks apart rather than repeating them too soon.

Choose cartridges made for the A6S model family and learn how its 3-lock connector secures them.

Explore microneedling serum options to find a product that fits your skincare routine.

Immediate post-treatment precautions

Preparing skin and treatment area

Preparing to use a Dr. Pen microneedling device

Recommended interval between microneedling treatments

Advanced Microneedling Serum SD - Control Salmon DNA Ampoule Serum

After microneedling, avoid exercise, sweating, and makeup for 24 hours. Protect exposed skin from direct, prolonged sunlight for up to 1 week.

Post-session warnings cover activity, sun exposure, cleansing, and skincare. They are not a list of medical contraindications, so read the device’s safety instructions before beginning.

The A6S manual is the reference for device troubleshooting. Match the manual to the A6S model, and use English instructions compatible with your US device.

Keep the first 24 hours low-key. Skip workouts and other activities that make you sweat. Avoid makeup during this period, too. Sweat and cosmetics can irritate freshly needled skin, so keep your routine simple. If you need to go outdoors, use high-protection sunscreen as advised after microneedling.

Cleanse and moisturize at the right time. After 24 hours, wash your face with a gentle cleanser. Follow with a nourishing moisturizer. Use clean hands and a light touch while washing. Avoid rubbing with a washcloth or towel, since friction can add irritation while your skin settles.

Pause potentially irritating products for 24 hours. Avoid fragrance, active ingredients, acids, physical scrubs, and toners that may irritate. Check product labels before applying anything to the treated area. For example, set aside exfoliating acids and grainy scrubs during this window. Resume products cautiously, rather than layering several new formulas at once.

Limit direct sunlight for up to 1 week. High-protection sunscreen matters when you go outside, but also avoid direct, prolonged sun exposure. Choose shade where practical and keep outdoor time brief. This one-week precaution extends beyond the first day, so don’t treat the 24-hour skincare pause as the end of sun care.

Keep your routine gentle as your skin settles. Avoid adding strong actives, scented formulas, or exfoliation during the initial 24 hours. Choose the gentle cleanser and nourishing moisturizer instead. Check how your skin feels before returning to products that may sting or cause discomfort, especially exfoliating formulas.

Return to your regular routine gradually. Dr. Pen advises returning to regular skincare 7 or more days after microneedling. Don’t confuse that timeline with the 24-hour pause for specific irritants. Keep sun precautions in place for up to 1 week, and reintroduce products with care.

Separate skin concerns from device problems. The precautions above address your skin after a session, not pen performance. For an A6S issue, follow model-specific troubleshooting instructions. Don’t attempt to solve a device fault by changing your aftercare routine or repeating a session.

Keep the instructions matched to your device. Use English guidance that identifies the Dr. Pen A6S and corresponds to your US model. Model-specific directions matter for safe operation. Read the safety warnings before use, and keep aftercare directions handy for the first 24 hours and following week.

Set up a clean, uncluttered treatment area. Place the Dr. Pen, cartridge, cleanser, and preparation supplies within reach before starting. Keep the treatment surface clear so you can focus on the skin area being prepared. Read the A6S instructions first, and follow the device-specific directions throughout your setup.

Cleanse the treatment area twice. Dr. Pen advises cleansing twice before microneedling to remove makeup and lotions. Use a gentle cleanser for both passes, and rinse away residue each time. Check areas near the hairline and jaw, where makeup or skincare can remain. Start only after the skin is clean and free of visible product.

Apply numbing cream only as directed. Dr. Pen recommends numbing creams with at least 5% lidocaine. The guide suggests applying approximately one-third to one-half of a tube to the treatment area; another instruction says approximately half a tube. Spread the cream over the intended area, rather than applying it beyond the planned treatment zone.

Allow the cream to sit for the stated interval. Leave numbing cream on for 20 to 30 minutes before removing it and cleansing the skin. Use a timer so you don’t cut the interval short or leave the cream on longer than directed. Keep the treatment area covered only as the cream’s own directions specify.

Remove the numbing cream completely. Wipe it away before microneedling, then cleanse the skin again as directed. Dr. Pen’s guide lists 60% alcohol mixed with purified water, or 0.1 chlorhexidine, for wiping away remaining cream. Follow the preparation directions for the option you use, and avoid leaving cream residue behind.

Inspect the skin before bringing out the pen. Look over the entire treatment area in good light after cleansing. Check for remaining makeup, lotion, or numbing cream, especially around the nose and hairline. If you find residue, clean that spot before proceeding. Keep the pen away from unprepared skin until the area is ready.

Keep the intended treatment area clear. Work methodically across the area you prepared, rather than extending the session onto skin that still has makeup or lotion. For a facial session, check the forehead, cheeks, chin, and jawline separately. This simple area-by-area check helps you prepare consistently before using the A6S.

Gather compatible supplies before beginning. Keep your chosen cleanser and preparation items separate from used materials. If you’re organizing products for a microneedling routine, browse microneedling supplies alongside the A6S instructions. Set out only what you need for the planned area, and keep the preparation steps in sequence.

Prepare the device, cartridge, and treatment settings before starting. Use the A6S instructions to identify its controls and setup steps.

Install or Replace Needle Cartridges Choose a cartridge made for the A6S family, then align it with the pen’s 3-lock connector. Secure it according to the device instructions, without forcing the connection. Before use, check that the cartridge sits firmly and appears undamaged. Replace it whenever you begin a new session, and don’t reuse a cartridge.

Install or Replace Needle Cartridges

Choose a cartridge made for the A6S family, then align it with the pen’s 3-lock connector. Secure it according to the device instructions, without forcing the connection. Before use, check that the cartridge sits firmly and appears undamaged. Replace it whenever you begin a new session, and don’t reuse a cartridge.

Select Needle Depth and Speed Settings Set depth for the treatment area, not simply for convenience. Dr. Pen recommends 0.5 mm for legs and up to 1.5 mm for fattier body areas. Those body recommendations aren’t a universal facial setting. The A6S Professional Plus has six speed settings; start with its manual’s guidance for the chosen area, and don’t assume a faster setting means better results.

Select Needle Depth and Speed Settings

Set depth for the treatment area, not simply for convenience. Dr. Pen recommends 0.5 mm for legs and up to 1.5 mm for fattier body areas. Those body recommendations aren’t a universal facial setting. The A6S Professional Plus has six speed settings; start with its manual’s guidance for the chosen area, and don’t assume a faster setting means better results.

Clean and Maintain the Microneedling Pen Prepare sterilization equipment with an isopropyl alcohol solution of 70% or above. Keep the cartridge separate while preparing the pen, and follow its instructions for cleaning device surfaces. Don’t immerse the pen or allow liquid into openings. After cleaning, inspect the body and connector for residue or visible damage before storing the device.

Clean and Maintain the Microneedling Pen

Prepare sterilization equipment with an isopropyl alcohol solution of 70% or above. Keep the cartridge separate while preparing the pen, and follow its instructions for cleaning device surfaces. Don’t immerse the pen or allow liquid into openings. After cleaning, inspect the body and connector for residue or visible damage before storing the device.

Interpret Buttons, Display, and Indicator Lights Use the A6S manual’s labels to identify each button, display reading, and indicator light before powering the pen. Match the displayed speed to the selected setting, then confirm the device responds as described. Don’t infer a light’s meaning from its color alone; use the model-specific diagram and avoid operating the pen if its display conflicts with the instructions.

Interpret Buttons, Display, and Indicator Lights

Use the A6S manual’s labels to identify each button, display reading, and indicator light before powering the pen. Match the displayed speed to the selected setting, then confirm the device responds as described. Don’t infer a light’s meaning from its color alone; use the model-specific diagram and avoid operating the pen if its display conflicts with the instructions.

Prepare your body before the session. Dr. Pen advises avoiding anti-inflammatory medication, alcohol, and fish oil tablets for 3 days before treatment to minimize bleeding. Follow this preparation step before setting up the pen. Keep the device instructions nearby, so you can review settings without interrupting your setup.

Check the setup in sequence. Confirm the cartridge connection, selected depth, and speed before bringing the pen to skin. For the A6S, verify the selected speed against the display and manual. If you’re preparing body areas, keep the specific depth recommendations in view. This final check helps prevent carrying a setting from one area to another.

Before beginning, check the supplied items for the Dr. Pen Ultima A6S Professional Plus Microneedling Pen: it is supplied with 2 lithium-ion batteries and includes 2 round nano-pin cartridges. Confirm these are present as you prepare the device, and keep the cartridge type in mind when reviewing the setup instructions. Check the warranty terms for your specific pen before relying on coverage. Dr. Pen devices other than the A20 and T6 have a 2-year warranty, so check which warranty applies to the specific device rather than assuming all models share the same coverage.

When planning the treatment, avoid microneedling over bony areas, especially the legs, as Dr. Pen advises. Dr. Pen recommends moving the pen vertically, horizontally, and diagonally in both directions. Before starting, consider these movement directions and areas to avoid, along with the selected depth and speed, so your preparation accounts for the device and treatment area.

Schedule microneedling 4 to 6 weeks apart, and no more than once per month. Nanoneedling follows a separate 1-2-week interval, so label each procedure clearly.

Name the procedure before choosing a date. Write “microneedling” or “nanoneedling” beside each calendar entry. This distinction matters because the recommended intervals differ. Don’t use a nanoneedling date to calculate your next microneedling session, or vice versa. Clear labels help keep your calendar tied to the procedure you actually plan.

Record the date of each session. Add the procedure type and date to one calendar or treatment log immediately afterward. Use that record to calculate the next eligible date, rather than relying on memory. If you track several areas or device sessions, identify each entry plainly so you don’t mistake one appointment for another.

Schedule microneedling inside its recommended window. Choose a date 4 to 6 weeks after the prior microneedling session. Dr. Pen also advises no more than once per month. Treat these as linked scheduling limits, not separate reasons to book more frequently. A calendar reminder can flag the window without automatically setting an appointment.

Plan a series using the stated spacing. Visible improvements in fine lines and wrinkles have been seen after 3-6 treatments spaced about 4-6 weeks apart. If you’re mapping a series, place each planned session within that spacing. Keep the dates flexible within the recommended window instead of compressing the course to finish sooner.

Keep nanoneedling on its own schedule. The recommended nanoneedling interval is once every 1-2 weeks. Make a separate calendar entry for it, and don’t substitute that shorter interval for microneedling. When both procedures appear in your records, write their names in full rather than using a single shared reminder.

Review your calendar before setting a new session. Check the previous entry’s procedure and date first. Then calculate the next date using that procedure’s interval. This small review catches common scheduling mix-ups, such as counting from a nanoneedling session when planning microneedling.

Keep the treatment record useful. Alongside dates, note the procedure and the device settings used. These details help you distinguish sessions when reviewing your routine later. Don’t use a record of past appointments to justify shortening the recommended interval; use the schedule stated for the procedure you’re planning.

Before booking a future appointment, check your calendar against the monthly limit. The guide recommends microneedling no more than once per month, so keep your schedule within that boundary.

Use cartridges made for the A6S family. The pen connects cartridges through a 3-lock connector, so match the cartridge and connection before starting.

Identify the exact pen model. Read the device label and confirm it says Dr. Pen A6S. The A6S uses its own cartridge family, so don’t choose a cartridge based only on appearance. Matching the model family is the first check before installation or replacement.

Select an A6S-compatible cartridge. Check the cartridge packaging for A6S compatibility before opening it. The A6S package includes 2 16-pin cartridges. Other A6S cartridge options include 11-pin, 16-pin, and 42-pin styles. Choose the type intended for your planned use, rather than assuming every cartridge fits.

Review the connector before fitting. Locate the pen’s 3-lock connector and inspect the cartridge base. Compare its shape with the A6S instructions. Keep the connection area clear of packaging and residue. A correct family match matters, since a cartridge that looks similar may belong to another pen model.

Align the cartridge with the connector. Hold the cartridge by its base, keeping the needle end pointed away from your fingers. Position its base at the A6S connector as shown in the manual. Use the 3-lock design to secure the cartridge, following the model’s fitting directions rather than forcing or improvising the motion.

Questions & discussion

YOUR ROUTINE. YOUR REQUIREMENTS.

A better beauty choice starts with a conversation.

From one device to a wholesale order or custom project, tell us what you have in mind.

LIKEBEAUTY

Let’s find your fit

Tell us what you need. Your request stays with our team for a personal reply about products, quantities or customization.

I’m interested in

By submitting, you agree that we may use these details to respond to your request. Read our Privacy policy