New Type Hydrogen Oxygen Water Oxygen Injector Face Skin Rejuvenation Cleaning Blackheads Removal Machine
Feature:
1. Cleaning the pores without hurting the skin. Lift and tighten, deeply hydrate and wake up the skin.
2. High definition skin detector for high inspection of the scalp and skin.
3. BIO Lifting probe to tighten skin and improve fine lines for face skin.
4. Hydrogen oxygen small bubble probe, can suck out blackhead stubborn acne
5. Hydrogenoxygen injection probe, can be nano mist quick solution of muscle thirst
6. Ice hammer can calm skin and shrink pores, with 2 different kinds of water bottle capacity.
7. Ultrasonic probe, high frequency vibration atomization, better help for skin absorption.
Specification:
Condition: 100% Brand New
Item Type: Water Oxygen Injector
Material: ABS
Frequency: 50Hz
Power: 35W
Product Weight: 5.2kg
Water Bottle Capacity: 800ml water bottle x 2, 400ml water bottle x 3
Package Included:
Installation Instructions
1. Open and inspection
1.1 Carefully remove the instrument and accessories from the packing case and keep the packing materials for future transportation or preservation. Order the wine accessories according to the packing list.
1.2 Check for any mechanical damage.
The instrument should be placed in a cleaning and ventilated room with a temperature between 5 and 40 and a humidity of no more than 80%, avoid direct sunlight, ensures that the vent is not blocked, and ensures that there is at least a 5cm gaps around the instrument.Don't put anything on the instrument, even if it is temporary, it is not allowed.According to the text and picture information above the output interface on both sides of the instrument, insert the accessories into the corresponding interface.Then place the accessories neatly on the rack.
Use of functions:
1. Use the handle to cleaning: remove makeup and cleaning
Select a suitable head according to the skin, and turn the knob in front of the screen to use the original solution bottle A,B, or D. Adjust the suction and water flowing, and cleaning (10 minutes)
Note:
When using D bottle (H2, O2), rotating knob to D, then put down the H2 and O2 button and wait for 3 minutes, stay in the bottle to produce enough H2, O2) to use the whole face after cleaning, rotating knob to position C bottle cleaning water pipe, first turn on the water yield to adjust to the largest positive rotating knob (instrument), transferred to the biggest attraction, open the instrument, with random give cover the lid of the grinding head, instruments and automatic cleaning line.
Note:
When the whole bottle of diluted stock is used up, the warm water on the A. B.C. D bottle must be cleaned again the same way as the pipe to prevent the pipe from clogging.
2. Use of spray pen:
1) Cleaning the parts to be operated;
2) Pour the serum into the container on the spray pen;
3). Press the stylus button on the screen:
4). The spray marks should be aligned with the operating position, and press the on key on the handle to start the operation.
3. Use of ice hammer handle:
1) Cleaning the parts to be operated;
2). Press the start button;
3). Operate the front part of the handle in contact with the acting part.
4.RF usage:
1) Cleaning the parts to be operated;
2) Apply an appropriate amount of nutritional gel to the action site;
3) Adjust working hours, RF working strength and mode;
4). Twists the RF head to attach the working part, click the RF icon on the screen or press the start button on the handle to start the RF function;
5) Encircle the neck according to the lines of the inspection department, and the customer should cooperate to lift the neck and line the neck from bottom to bottom.The operating time of each part is 10-15 minutes.
5. Use of ultrasonic:
1) Cleaning the parts to be operated;
2) Apply appropriate amount of serum to the affected part;
3) Adjust the working time, the working strength of the sound waves and the reference of the mode;
4). Attach the sound waves head to the working part, click the sound waves icon on the screen, and then press the start button on the handle to start the sound waves function;
5) Turn the wheel and pull it in circles slowly for 5-8 minutes;
6. Use of testing:
To use the probe, restart the host switch, then select the probe handle to enter the test interface, select "Before nursing" and click the photo icon to save the test picture. The mode after nursing is the same as the mode before nursing. Finally, click analysis to finally appear the comparison before and after nursing.
Instructions for use:
1. Please pour out the liquid in A, B, C. D bottles and waste liquid bottles before handling the instrument, otherwise the liquid will enter into the instrument during the process of lifting and sending, causing damage to the instrument!
2. During use, the device will make a warping sound. Observe the icon of the waste liquid bottle on the interface and it will flash.
Matters needing attention
1.1 Matters needing attention in the use place
Warning:
1) Please do not use and connect the socket, so as not to cause fire.
2) When replacing the fuse, the power switch must be turned off to avoid fire and electric shock;
3) Power supply and effectively grounded socket of 220V: 22V. 50HZ:1H2 must be used;
4) The use of damaged or processed power cord may cause fire hazard and electric shock:
5) Do not over-bend or use the power cord to avoid fire and electric shock;
6) If the instrument becomes loose, falls or is damaged, please contact the company in time:
7) Do not use the instrument in the unstable environment such as tilt, vibration and impact;
8) No water or sundries can enter the instrument. In case of foreign bodies, please contact the company in time.
9) Remove the power plug before moving the instrument:
10) Avoid vibration when the instrument is moving;
11) The device should be placed in a definite place and a space of at least 5cm around it should be set aside to ensures air circulation and facilitate heat dissipation of the instrument:
12) The instrument shall not be covered with anything to prevent the speech blocking through the R mouth;
13) For the first time, the instrument should not be used in the following environments: places exposed to sunlight: high humidity environment: near water environment;Vibrating and tilting places;Magnetic field environment, etc. : places where electromagnetic waves and impulse voltages occur: places where chemicals are kept, places where corrosive substances occur;
14) The instrument shall not be placed near the radio, TELEVISION, photocopier, fax machine, etc.;
15) It shall not be used with other instruments (such as microwaste), so as to avoid mutual interference and misoperation.
1.2 Cautions before use:
1) The operator must read the operation manual carefully before starting the machine. The operator must be familiar with the operation manual and methods. The instrument must be managed by a special person:
2) Please set the operating parameters under the guidance of professionals;Note:
3) Confirm whether the instrument is in normal operation before use;
4) Confirm whether the ground wire is connected correctly;
5) Make sure that all wires are properly connected and safe;
6) When the instruments are used together, they must be used correctly, otherwise there may be danger and great attention must be paid.
1.3 Cautions in use warning:
1) In case of any abnormality of the instrument or the patient during operation, the operator shall immediately leave the patient and press the stop switch to stop the use of the instrument: Note:
2) During the operation of the instrument, constantly observe the condition of the guest and the instrument, and pay attention to whether there is any abnormal situation at any time;
3) The instrument shall be used correctly by a skilled operator. Personnel other than the operator shall not use the instrument.
1.4 Matters needing attention after use
Note:
1) After the operation, return the control handle to the control handle hanger.
2) The probe shall be cleaned after the operation handle is used for another use.
1.5 Matters needing attention during failure, storage and inspection
Warning:
1) Please do not use the instrument in case of abnormal. In case of the smell of smoke and it cannot be operated, there will be the danger of fire and electric shock if it is continued to be used.Please immediately press the stop button, turn off the power, remove the power plug, and immediately contact the company or distributor;
2) Personnel other than technicians must not repair or modify the instrument.The insides of the instrument must not be opened;Note:
3) The instrument and all parts must be checked regularly;
4) Do not use cleaning tools that damage the protective coating of the instrument, such as brush and crane;
5) If the instrument is not used for more than 2 weeks, the instrument must be carefully checked before being used again.
1.6 Warning and suggestive explanations
Warning:
1) When the high-frequency equipment and the instrument are connected to the same patient at the same time, the electrode position of the instrument may cause skin tissue burns of the patient and may also cause damage to the instrument.When using the instrument near short waves or microwave equipment (1m), the output of the instrument may be unstable due to microwave interference.
2) The use of electrodes close to the chest increases the danger of cardiac fibers.
Contraindications:
1. People with sensitive skin or severe acne
2. Pacemaker, implantable cardiac deforester or other implantable device
3. Patients with severe diabetes, hypertension and hyperlipidemia.
4. Persons with skin infectious diseases
1 x Host Machine
1 x Power Cable
1 x Ice Hammer Probe
1 x RF Probe
1 x Spray Pen Probe
1 x Cleaning Probe
1 x Ultrasonic Probe
1 x Detection Probe
2 x 800ml Water Bottle
3 x 400ml Water Bottle
